- Factory stereos typically deliver only about 10 watts RMS per channel, so an amplifier gives your speakers cleaner power and more headroom.
- An amp helps most with upgraded speakers, road noise and subwoofers, which need their own amp.
- You may not need one if the volume is already satisfying and the sound is clean.
- Match the amp's RMS output per channel to your speakers' RMS rating, and do not overpower them.
After you upgrade your speakers, the next question is whether you also need an amplifier. The honest answer is sometimes. Here is how to decide, and what to match if you add one.
What an amplifier does
An amplifier gives your speakers a clean source of power. Most stereos, factory or aftermarket, have a small amplifier built in, and it is limited. A separate amp adds clarity, handles sudden loud peaks without distortion and keeps music clear over road noise. It does not change how good the recording is, and a bigger or louder amp does not mean better sound. Improvements come from the right amount of power and a good setup.
When you probably need one
- You added a subwoofer. Bass needs substantial power, so a subwoofer generally needs its own amplifier.
- You upgraded your speakers. Many speakers sound better when an amp drives them rather than a head unit.
- Music distorts at higher volume. That points to a lack of clean power, as explained in our distortion guide.
- Road noise drowns out the music. More clean power helps the music stay clear.
When you can skip it
If your current volume is satisfying and you hear no distortion, you may not need an amp. Put the money into better speakers or sound deadening first, as our budget guide explains.
How much power should you choose?
One retailer guide suggests about 50 watts RMS per channel or less for small cars and factory speakers, about 75 watts RMS for larger vehicles or louder listening, and 100 watts RMS or more for very loud systems. The key rule is that the amp's top RMS output per channel should not exceed what each speaker can handle. If your front and rear speakers differ, use the lower rating.
How many channels?
- Front speakers only: a 2 channel amp.
- Front and rear speakers: a 4 channel amp.
- Speakers plus a subwoofer: a 5 channel amp, or a 4 channel amp and a separate mono amp.
- Subwoofer only: a mono, single channel amp.
What else you will need
Amplifiers do not include wiring, so budget for power and ground cables, speaker wire and RCA cables. If your car has a factory stereo with no RCA outputs, you may need a line output converter or an amp with speaker level inputs. Many modern cars also need a vehicle specific interface, so check this before you buy.
Comments